• +91-85699-09696

Bunsen Burners Manufacturer,Supplier and Exporter in India

Bunsen Burners

Product Code : JA-CE-4299

This Bunsen burner has an iron and steel body on a stable bench base. Dual gas nipples let it take either an LPG or a PG supply. An adjustable stop cock sets the gas flow, and so the size of the flame. It heats test tubes, beakers and crucibles, and gives the flame for flame tests and sterilising loops.

Specifications of the LPG and PG Bunsen burner

Product codeJA-CE-4299
Body materialIron and steel
Gas connectionDual nipples for LPG or PG supply
Flame controlAdjustable stop cock
BaseStable bench base
ManufacturerJaincoLab, Ambala, India

Bench work with the Bunsen burner

  • Heating on a tripod. Connect the burner to a gas tap and stand the beaker or flask on wire gauze over a tripod stand. Heat it with the blue flame.
  • Flame tests for metal ions. Dip a clean loop of nichrome wire in the sample and hold it at the edge of the flame to see the colour.
  • Heating a crucible. Heat the crucible strongly to drive off water, then lift it off with tongs for crucibles and let it cool.
  • Sterilising in microbiology. Heat an inoculating loop until the wire glows red along its length. Let it cool for a moment before it touches the culture.

Frequently Asked Questions

What are the two gas nipples on the burner for?
They let the burner take either an LPG or a PG supply. Push the gas tubing firmly onto the nipple that suits the gas line on your bench, and keep the tubing short and free of kinks.

Why is the flame yellow and smoky?
Too little air is mixing with the gas, so it burns incompletely. A yellow flame is cooler and leaves soot on glassware. Let more air in at the air hole to get a clean blue flame for heating.

Which flame should be used for heating?
Heat with the blue flame. It is hotter and does not blacken glass. Turn back to the yellow flame whenever the burner is lit but not in use, because it is easy to see on the bench.

What is the safe order for lighting the burner?
Check the tubing first and close the air hole. Light a splint or lighter, hold it just above the barrel, then open the gas. Set the flame size with the stop cock and open the air hole for heating.

How should the gas tubing be checked before a practical?
Look along it for cracks, hard spots and loose ends. It should fit tightly on the nipple and the gas tap, and lie well clear of the flame. Replace damaged tubing instead of taping it.

What should students do when they finish heating?
Turn off the gas at the bench tap first. Leave the burner standing on the bench to cool, since the barrel stays hot for some time. Never move it by the barrel.

Other bench items in Chemistry Equipment

See the Chemistry Equipment range and more chemistry apparatus from JaincoLab, a chemistry lab equipment manufacturer in India.

For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.

Last updated: 14 November 2026

   

Office Address

Jain Scientific Suppliers
2475-84, Hargolal Road,
Ambala Cantt, Haryana, India

[email protected]

+91-85699-09696

Follow Us