• +91-85699-09696

categories

Data Acquisition, Instrumentation and Process Control Manufacturer, Suppliers and Exporter in India

Jaincolab Manufacturers is a leading Data Acquisition, Instrumentation and Process Control Manufacturer, Supplier, and Exporter in India, United States, Indonesia, Brazil, Bangladesh, Mexico, Japan, Egypt, Philippines, Democratic Republic of the Congo, Vietnam, Iran, Turkey, Tanzania, United Kingdom, France, South Africa, Italy, Kenya, Colombia, Sudan, Uganda, South Korea, Argentina, Afghanistan, Yemen, Angola, Morocco, Poland, Uzbekistan, Mozambique, Malaysia, Ghana, Saudi Arabia, Peru, Madagascar, Côte d’Ivoire, Cameroon, Niger, Venezuela, Australia, Syria, Mali, Burkina Faso, Sri Lanka, Malawi, Zambia, Chad, Kazakhstan, Somalia, Chile, Senegal, Ecuador, Cambodia, Zimbabwe, Guinea, Benin, Rwanda, Burundi, Bolivia, South Sudan, Tunisia, Haiti, Belgium, Dominican Republic, Jordan, United Arab Emirates, Honduras, Tajikistan, Papua New Guinea, Portugal, Togo, Sierra Leone, Belarus, Laos, Turkmenistan, Libya, Kyrgyzstan, Nicaragua, Paraguay, Bulgaria, Serbia, Republic of the Congo, Lebanon, Liberia, Central African Republic, Palestine, Oman, Mauritania, New Zealand, Costa Rica, Kuwait, Panama, Croatia, Georgia, Eritrea, Mongolia, Uruguay, Qatar, Namibia, Bosnia and Herzegovina, Moldova, Armenia, Gambia, Jamaica, Lithuania, Albania, Gabon, Botswana, Lesotho, Guinea-Bissau, Slovenia, Equatorial Guinea, Latvia, North Macedonia, Bahrain, Trinidad and Tobago, Timor-Leste, Cyprus, Estonia, Eswatini, Mauritius, Djibouti, Fiji, Comoros, Solomon Islands, Guyana, Bhutan, Luxembourg, Suriname, Montenegro, Malta, Maldives, Cabo Verde, Brunei, Belize, Bahamas, Iceland, Vanuatu, Barbados, São Tomé and Príncipe, Samoa, Saint Lucia, Kiribati, Seychelles, Grenada, Saint Vincent and the Grenadines, Antigua and Barbuda.

Last updated: 16 November 2026

What is in the data acquisition, instrumentation and process control range?

This range has eight items for automation and process control courses. Four are PLC items: a PLC trainer, industrial PLC systems, application modules and a conveyor sorting trainer. Two are temperature and level process control trainers. Two are illuminated process panels with LED flow animation for oil and palm oil production.

Item groups in the process control range

GroupItemsWhat it covers
PLC trainingProgrammable Logic Controller Trainer (JA-DAIAPC-9610), Industrial PLC System (JA-DAIAPC-9611), Programmable Logic Controller Trainer Modular Application Modules (JA-DAIAPC-9612)PLC trainers, industrial PLC systems in several versions and application modules that connect to the trainers
PLC applicationConveyor System Trainer (JA-DAIAPC-9613)Sorting items on a conveyor under PLC control
Process control loopsTemperature Process Control Trainer (JA-DAIAPC-9616), Level Process Control Trainer (JA-DAIAPC-9617)Temperature and level loops with panel-mounted components and large process diagrams
Illuminated process panelsIlluminated Process Panel for Steam Injection in Heavy Oil Production (JA-DAIAPC-9614), Illuminated Process Panel for Crude Palm Oil Production Simulation (JA-DAIAPC-9615)A1-size colour diagrams with LEDs that show the flow through an oil or palm oil process

PLC trainers and application units compared

Each item is listed with the details its product page gives. "Not listed" means the page does not state it.

ProductProduct codeWhat it isConnection or expansionUseDocuments
Programmable Logic Controller TrainerJA-DAIAPC-9610PLC trainerTakes accessories and peripherals for larger systemsPLC programming practiceStudent experiment manual
Industrial PLC SystemJA-DAIAPC-9611Industrial PLC systems in several versions with different capabilities and I/O countsPeripheral devices availableProject work and experimental set-upsNot listed
Programmable Logic Controller Trainer Modular Application ModulesJA-DAIAPC-9612Application training modules for PLC trainersQuick connection to the PLC trainersProgramming challenges on PLC-controlled equipmentOperation manual and experiment manual with programming exercises for each module
Conveyor System TrainerJA-DAIAPC-9613Conveyor sorting trainer under PLC control24 V DC inputs and outputs on sockets, terminals or a multi-pin connector, for wiring to a PLC trainer; needs about 7 to 14 digital inputs and 5 to 6 digital outputsTeaching PLC control applicationsNot listed

Process control trainers and process panels

ProductProduct codeProcessLayoutTeaching aids
Temperature Process Control TrainerJA-DAIAPC-9616Temperature controlComponents on a vertical front panelLarge-format process diagram
Level Process Control TrainerJA-DAIAPC-9617Level controlComponents on a vertical panelLarge-format process diagram; step-by-step instructional material
Illuminated Process Panel for Steam Injection in Heavy Oil ProductionJA-DAIAPC-9614Steam injection in heavy oil production (display)A1-size colour process diagramMicroprocessor-controlled LEDs showing the process flow
Illuminated Process Panel for Crude Palm Oil Production SimulationJA-DAIAPC-9615Crude palm oil production (simulation display)A1-size colour diagramLEDs under microprocessor control

How to choose PLC and process control equipment

  • To start PLC programming, choose the Programmable Logic Controller Trainer (JA-DAIAPC-9610). It comes with a student experiment manual and can take accessories and peripherals as a lab grows.
  • For project work on industrial hardware, choose the Industrial PLC System (JA-DAIAPC-9611). It comes in several versions with different capabilities and input/output counts, so state the I/O you need.
  • To give students real equipment to control, add the application modules (JA-DAIAPC-9612), which connect quickly to the PLC trainers, or the Conveyor System Trainer (JA-DAIAPC-9613) for sorting tasks.
  • For closed-loop control, choose the Temperature (JA-DAIAPC-9616) or Level (JA-DAIAPC-9617) Process Control Trainer. Both mount their components on a vertical panel with a large process diagram.
  • To explain a whole plant to a class, the illuminated process panels (JA-DAIAPC-9614 and JA-DAIAPC-9615) show the flow on an A1-size colour diagram with microprocessor-controlled LEDs.
  • Match the I/O before ordering. The Conveyor System Trainer needs about 7 to 14 digital inputs and 5 to 6 digital outputs on the PLC. Module titles are chosen with the order, and the pages do not name a PLC make or model.

Practicals and teaching tasks covered

TaskProducts used
Writing and testing ladder programs with latching, timers and countersProgrammable Logic Controller Trainer or Industrial PLC System
Programming a PLC to sort items on a conveyorConveyor System Trainer
Solving programming challenges on PLC-controlled equipmentProgrammable Logic Controller Trainer Modular Application Modules with Programmable Logic Controller Trainer
Running a closed temperature loop and adjusting the controller settingsTemperature Process Control Trainer
Holding a tank level at its setpoint and studying the loop responseLevel Process Control Trainer
Explaining the stages of an oil or palm oil process to a classIlluminated Process Panel for Steam Injection in Heavy Oil Production or Illuminated Process Panel for Crude Palm Oil Production Simulation

Who uses these trainers

Instrumentation, electrical and chemical engineering departments, polytechnics and industrial training centres use these items in automation and process control courses. The illuminated panels show oil and palm oil production processes for classroom teaching.

Ordering PLC and process control trainers

Quote the product code of each item. The PLC trainer, the industrial PLC system and the level trainer run on 230 V AC, 50 Hz mains. The level trainer, and the pneumatic version of the conveyor trainer, also need compressed air. The pages do not name a PLC make or model. They give no ratings for the temperature trainer and no supply for the illuminated panels, so state what your course needs. Send the list through our contact page.

Automation and electronics ranges related to process control

Process control and PLC trainers belong to the Electronics Lab Equipments range from JaincoLab, an electronics lab equipment manufacturer in India.

RangeWhat it covers
Electrical Motor ControlA motor control circuit trainer, a motor generator system and sectioned motors
Wiring, Distribution and ProtectionElectrical installation, circuit fault and electrical machine trainers
Electrical TechnologyElectrical measurement, transformer and metering, and appliance repair trainers
Lighting and Building Control SystemsSecurity and fire alarm trainers, solar energy trainers and a DDC control training system
Variac DimmerstatsSingle phase and three phase variacs in panel and portable types
Digital Electronics TrainerLogic training boards for gates, flip-flops, counters, converters, multiplexers and decoders
Breadboard TrainersBreadboard circuit labs, digital and analog labs, and logic trainers
Power Electronics TrainersSCR, triac and UJT trainers, thyristor converters and motor speed control
Electronic FundamentalsBasic electricity and electronics trainers, an operational amplifier trainer and automotive electrical trainers
Analog Electronics TrainerTraining boards for diodes, transistors, amplifiers, oscillators, filters and bridges
OscilloscopesDual trace oscilloscopes, an oscilloscope with digital readout and a frequency counter
Digital Storage OscilloscopesDigital storage oscilloscopes, including dual channel and four channel models
Signal GeneratorsFunction generators, an AM and FM function generator and an RF signal generator
Communication TrainerAmplitude, frequency, pulse and phase modulation trainers, multiplexing and transmission line trainers
Radio and Telephone CommunicationsAM FM radio, CB transceiver, walkie talkie, mobile phone and microwave trainers

Frequently Asked Questions

What do the P, I and D terms do in a process controller?
Proportional action responds to the present error. Integral action removes the steady offset that proportional control alone leaves. Derivative action reacts to how fast the error is changing, which reduces overshoot. Level and temperature loops on a trainer are usually tuned with P and I first.

What is the difference between direct and reverse acting control?
A direct-acting controller raises its output when the process variable rises above the setpoint. A reverse-acting controller lowers its output instead. A heating loop is reverse acting: when the temperature goes too high, the heater power must fall.

Why are stop buttons wired as normally closed contacts to a PLC?
A normally closed stop button holds the input on while the circuit is healthy. If the button is pressed or a wire breaks, the input goes off and the program stops the machine. A normally open stop button would fail unsafe, because a broken wire would go unnoticed.

Is a PLC simulator enough, or do students need a physical trainer?
Simulation software is good for learning ladder logic, but students also need real inputs and outputs. Wiring sensors, push buttons and motors on a trainer teaches I/O addressing, wiring faults and safety that a simulator cannot show.

Should a PLC trainer order include the programming cable and software licence?
Ask for both in your enquiry. Give the number of PCs the software must run on and ask for a programming cable with each trainer, so the quotation covers them. The PLC pages name the programming software but not the licences or cables. Send the details through our contact page.

Should a PLC or process control tender ask for a list of experiments?
Yes. Ask for the list of experiments each trainer supports and the manual that covers them. The PLC trainer page lists a student experiment manual, and the level trainer lists step-by-step material. Comparing these with your syllabus shows whether a trainer fits the course.

For a quotation, list the items with their product codes and the number of sets you need, and send it through our contact page. For tender or project supply, see our tenders page.

Programmable Logic Controller Trainer

Programmable Logic Controller Trainer

Product Code : JA-DAIAPC-9610

Bench PLC trainer with a compact PLC, 24 V DC digital I/O, input switches, LED indicators and ladder logic software. Comes with a student experiment manual and accepts accessories to grow into a larger system.

View Details
Industrial PLC System

Industrial PLC System

Product Code : JA-DAIAPC-9611

Industrial PLC systems in several versions with different I/O counts, for project work and experimental set-ups. 24 V DC digital I/O, voltage and current analogue I/O, Ethernet and PC programming software.

View Details
Programmable Logic Controller Trainer Modular Application Modules

Programmable Logic Controller Trainer Modular Application Modules

Product Code : JA-DAIAPC-9612

Application modules that connect quickly to the PLC trainers and give students programming tasks on models of PLC-controlled equipment. 24 V DC signals, patch-cord connection and an experiment manual for each module.

View Details
Conveyor System Trainer

Conveyor System Trainer

Product Code : JA-DAIAPC-9613

PLC conveyor sorting trainer. A 24 V DC belt conveyor with inductive, optical and colour sensors and pushers that sort items into chutes, with I/O brought out for wiring to a PLC trainer.

View Details
Illuminated Process Panel for Steam Injection in Heavy Oil Production

Illuminated Process Panel for Steam Injection in Heavy Oil Production

Product Code : JA-DAIAPC-9614

Illuminated process panel of steam injection in heavy oil production. A1-size colour diagram with microprocessor-controlled LEDs that light each stage in sequence, for classroom and staff training.

View Details
Illuminated Process Panel for Crude Palm Oil Production Simulation

Illuminated Process Panel for Crude Palm Oil Production Simulation

Product Code : JA-DAIAPC-9615

Illuminated process panel of crude palm oil production. A1-size colour diagram of the mill with LEDs under microprocessor control that light each station in turn, for agro-processing and food technology classes.

View Details
Temperature Process Control Trainer

Temperature Process Control Trainer

Product Code : JA-DAIAPC-9616

The Temperature Process Control Trainer gives an experimental introduction to the fundamentals of process control, using temperature control as the example.

View Details
Level Process Control Trainer

Level Process Control Trainer

Product Code : JA-DAIAPC-9617

Level process control trainer with its components on a vertical panel and a large-format process diagram. Process tank, pump, 4 to 20 mA level transmitter and PID controller, with step-by-step instructional material.

View Details

Office Address

Jain Scientific Suppliers
2475-84, Hargolal Road,
Ambala Cantt, Haryana, India

[email protected]

+91-85699-09696

Follow Us