• +91-85699-09696

My Temp Mini CO2 Digital Incubator Manufacturer,Supplier and Exporter in India

My Temp Mini CO2 Digital Incubator

Product Code : JA-LE-8194

The My Temp Mini CO2 Digital Incubator (SKU JA-LE-8194) is a compact digital CO2 incubator with a 20 litre chamber, only about 13 inches wide, so it fits inside a biological safety cabinet or on a small bench. Temperature and CO2 level are set digitally and shown in real time on an LED panel, and the CO2 is read by a dual-beam infrared sensor. It is supplied by JaincoLab.

Specifications

Performance and size values listed for the incubator:

Product My Temp Mini CO2 Digital Incubator
SKU JA-LE-8194
Chamber capacity 20 L (0.7 cu ft); takes flasks and bottles up to 2 L
Temperature range Room temperature -10°C to 55°C
Temperature accuracy / uniformity 0.25°C / 0.5°C (at 37°C)
Temperature setting step 0.1°C
CO2 range 0 to 20%
CO2 sensor and accuracy Dual-beam infrared; 0.1% (at 5%)
Humidity 70 to 80% with the included stainless steel reservoir
Shelves Two removable, perforated stainless steel
Exterior (w x d x h) 33.5 x 37 x 47.5 cm (13.2 x 14.5 x 18.7 in)
Interior (w x d x h) 26 x 23.5 x 32.5 cm
Weight 6.5 kg
Electrical 100 to 240 V, 50-60 Hz; 12 V vehicle power adapter included

Scope of supply and ordering

Each incubator comes with its two perforated shelves, the humidity reservoir and the 12 V vehicle adapter; please give the number of units and the delivery address so the quotation can confirm packing and lead time.

Frequently asked questions

How is the CO2 level measured and monitored?
A dual-beam infrared sensor monitors the CO2 continuously, and audible and visual alarms are triggered if the level drops.

What happens to the temperature after a power cut?
Once power is disconnected, the thick insulation keeps the chamber within 10% of the set temperature for up to 1 hour.

Can the incubator run away from mains power?
Yes, a 12 V vehicle power adapter is included for running it in a car or boat, for example when moving cells.

Can the readings be calibrated in the lab?
The control panel has a "Cal" function for in-lab calibration of temperature or CO2.

Related products

Incubators, shakers and dry baths are listed together in our laboratory equipment range.

Request a quote

Request a quotation for the My Temp Mini CO2 Digital Incubator on our contact page. Buying under a laboratory tender? Use our tenders page.

Last updated: September 2026

   

Office Address

Jain Scientific Suppliers
2475-84, Hargolal Road,
Ambala Cantt, Haryana, India

[email protected]

+91-85699-09696

Follow Us