MIG Welding Machine Manufacturer,Supplier and Exporter in India
Product Code : JA-CLE-9049
The MIG Welding Machine (SKU JA-CLE-9049) is a constant voltage MIG welding machine complete with wire feeder unit and shielding gas switch. It gives at least 180 A at 100% duty cycle and a maximum current of not less than 240 A on a 220/380 V, 3 phase, 50 Hz supply. A double wire feeder takes aluminium wire of 0.8-1.2 mm, and the 300 A air-cooled gun comes on a 3 m hose with an on-off switch at the holder. It is supplied by JaincoLab.
Specifications
The machine is constant voltage, delivers min. 180 A at 100% duty and max. 240 A or more, runs on 220/380 V 3 phase, and has a double wire feeder for 0.8-1.2 mm aluminium wire and a 300 A air-cooled gun on a 3 m hose.
| Product | MIG Welding Machine |
| SKU | JA-CLE-9049 |
| Type | Constant voltage MIG welding machine with wire feeder |
| Duty cycle | Min. 100% at 180 A |
| Max. welding current | Not less than 240 A |
| Supply | AC 220/380 V, 3 phase, 50 Hz |
| Wire feeder | Double wire feeder for aluminium wire, 0.8 - 1.2 mm |
| Welding gun | 300 A, air cooled, 3 m hose assembly, on-off switch at holder |
| Operation | Semi automatic or automatic |
| Gas control | Switch controlling shielding gas flow |
Applications of the MIG welding machine
The MIG machine teaches semi-automatic wire welding, where trainees learn to set voltage, wire feed and gas flow and to produce clean, fast welds on steel and aluminium.
- MIG welding of steel and aluminium
- Setting voltage, wire feed and gas flow
- Butt, fillet and lap joints
- Welding positions practice
- Welder trade training in ITI, polytechnic and TVET courses
Scope of supply and ordering
The listing covers the MIG welding machine with wire feeder, gas control switch and air-cooled gun and hose as listed. Gas cylinder, regulator and wire are confirmed on the quotation.
There is no fixed MOQ on this listing: minimum quantity, lead time and packing are stated on the quotation for your order size and destination.
Frequently asked questions
What is the duty cycle?
At least 100% duty cycle at 180 A.
What wire does the feeder take?
Aluminium wire from 0.8 to 1.2 mm in the double wire feeder.
What supply is needed?
AC 220/380 V, 3 phase, 50 Hz.
Related products
See the complete mechanical engineering laboratory range for engineering colleges, polytechnics and ITIs.
Request a quote
For a quotation on the MIG Welding Machine (SKU JA-CLE-9049), use the JaincoLab enquiry page with the number of units required and the delivery destination. Tender and project enquiries can be sent through the tenders page.
