Universal Milling Machine Manufacturer,Supplier and Exporter in India
Product Code : JA-CLE-9033
The Universal Milling Machine (SKU JA-CLE-9033) is a universal milling machine for workshop and manufacturing labs, specified with a working table of at least 1200 x 280 mm with three 14 mm T-slots. A motor of at least 3.7 kW, 380 V, 3 phase drives the spindle from 60 rpm or lower to 1400 rpm or higher, and longitudinal, vertical and cross travels of at least 880, 400 and 250 mm are available in automatic and manual feed. It is supplied by JaincoLab.
Specifications
The machine is specified with a minimum 1200 x 280 mm table with 3 T-slots of 14 mm, minimum 3.7 kW 380 V 3 phase motor, minimum travels 880/400/250 mm with automatic and manual feed, and a spindle range covering 60 to 1400 rpm.
| Product | Universal Milling Machine |
| SKU | JA-CLE-9033 |
| Working table | Min. 1200 x 280 mm |
| T-slots | Min. 3, about 14 mm wide |
| Motor | Min. 3.7 kW, 380 V, 3 phase, 50 Hz |
| Longitudinal travel | Min. 880 mm, automatic and manual |
| Vertical travel | Min. 400 mm, automatic and manual |
| Cross travel | Min. 250 mm, automatic and manual |
| Spindle speed | Minimum not above 60 rpm; maximum not below 1400 rpm |
| Model and accessories | Confirmed on the quotation |
Applications of the universal milling machine
A universal milling machine lets students mill flat and angular surfaces, slots and gears, and with a dividing head it supports indexing work central to machine shop training.
- Plain, face and slot milling
- Angular milling with a swivelling table
- Gear cutting and indexing with a dividing head
- Automatic feed operation
- Machine shop practicals in ITI, polytechnic and B.Tech courses
Scope of supply and ordering
The listing covers one universal milling machine meeting the minimum specification listed. Dividing head, vice, arbors and cutters are confirmed on the quotation.
There is no fixed MOQ on this listing: minimum quantity, lead time and packing are stated on the quotation for your order size and destination.
Frequently asked questions
What table size is specified?
A working table of at least 1200 x 280 mm with three 14 mm T-slots.
What travels are available?
At least 880 mm longitudinal, 400 mm vertical and 250 mm cross, with automatic and manual feed.
What spindle speeds are covered?
From 60 rpm or lower up to 1400 rpm or higher.
Related products
See the complete mechanical engineering laboratory range for engineering colleges, polytechnics and ITIs.
Request a quote
To order the Universal Milling Machine, send the quantity and delivery destination through the JaincoLab contact page or email [email protected], quoting SKU JA-CLE-9033. Tender and project enquiries can be sent through the tenders page.
