Illuminated Process Panel for Steam Injection in Heavy Oil Production Manufacturer,Supplier and Exporter in India
Product Code : JA-DAIAPC-9614
This illuminated process panel shows steam injection in heavy oil production on an A1-size colour diagram. A built-in microcontroller lights LEDs along the diagram stage by stage, so the flow through the plant appears to move. Lecturers use it to explain how the plant is built and how it works.
Specifications of the steam injection process panel
| Product code | JA-DAIAPC-9614 |
|---|---|
| Process shown | Steam injection in heavy oil production |
| Diagram | A1 size (594 x 841 mm), printed in colour |
| Illumination | Microprocessor-controlled LEDs that light the stages in sequence and show the process flow |
| Control | Microcontroller system built into the panel |
| Supplied by | JaincoLab |
Teaching steam injection with the illuminated process panel
- Process walk-through. Run the LED sequence and follow the steam from the steam generator down the injection well, and the oil back up to the surface. At each lit stage, ask students to say what happens in the reservoir.
- Steam conditions. Before the panel lesson, measure how saturated steam pressure rises with temperature on the Marcet Boiler. Relate the readings to the steam generator shown on the diagram.
- Heat losses on the way down. Measure heat loss through an insulated pipe with the Heat Transfer Through Lagged Pipe apparatus. Then trace the steam line on the panel and mark each place where heat escapes before the steam reaches the oil.
Frequently Asked Questions
Why use an illuminated process panel when the plant already has HMI screens?
The panel shows the whole process at once, on one large diagram, without logging in or changing screens. It suits classroom teaching and induction of new staff. An HMI screen shows live values page by page, so trainees learn the overall flow on the panel first.
What are the three stages of cyclic steam stimulation?
First, steam is injected into a well for a period of time. Next, the well is shut in to soak, so the heat spreads into the oil around it. Finally, the same well is opened and the heated, thinner oil is produced until the rate falls and the cycle starts again.
How does injected steam help heavy oil flow to the production well?
Heavy oil is very viscous at reservoir temperature. Steam heats the oil, and its viscosity falls sharply, so it flows through the rock much more easily. The heat also makes the oil expand, and the steam pressure helps push it towards the producing well.
Where is heat lost between the steam generator and the oil reservoir?
Heat is lost from the surface steam lines, at the wellhead and along the wellbore to the cooler rock around it. Inside the reservoir, more heat passes into the rock layers above and below the oil zone. Insulated lines and tubing keep these losses down.
Can the panel be drawn to our own field's process flow diagram?
Yes. JaincoLab makes apparatus to a buyer's own technical specification or drawing. Send your process flow diagram and the stages you want lit with the enquiry. A prototype is sent for your approval before a bulk or tender supply.
Can the illuminated panel be moved between training rooms?
Yes, if you ask for it. JaincoLab makes apparatus to a buyer's own specification, so the panel can be built on a free-standing frame or in a carrying case. Say how often it will be moved and where it will be used when you send your enquiry through our contact page.
See the Data Acquisition, Instrumentation and Process Control range and more electronics lab equipment from JaincoLab, an electronics lab equipment manufacturer in India.
For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.
